4–4
Managing the DECserver 90L
Table 4–1
Port Parameters
Field
Description
Port Name
Maximum of six characters. The following characters can be
used: alpha, numeric, -, _, and $.
Speed
Sets the receive/transmit speed of the port. When a terminal is
connected to a port, the DECserver 90L automatically sets the
speed through autobaud. For use with printers or other such
devices the speed can be set to one of six values.
1 =38400 baud
2 =19200 baud
3 = 9600 baud
4 = 4800 baud
5 = 2400 baud
6 = 1200 baud
Input Control
Enables and disables input flow control (XON/XOFF).
E = Enable
D = Disable
C = Clear (send XON)
Output
Control
Enables and disables output flow control (XON/XOFF).
E = Enable
D = Disable
C = Clear (send XON)
Terminal
/Printer
Selects the type of device connected to the port. The port that
issues the set command cannot set its device type to the printer.
T = Terminal
P = Printer
Break
Determines if the port responds to a local or a remote break.
L = Local
R = Remote
Remote
Modify
Enables and disables modification of the port by the host
system.
E = Enable
D = Disable
