Digital Equipment DECserver 90L, Руководство пользователя

Страница: 41 / 66

4–14 Managing the DECserver 90L
The following example shows how to clear the authorized mode.
-> Set
Return
|1 PORT_1*
|2 PORT_2
|3 PORT_3
|4 PORT_4
|5 PORT_5
|6 PORT_6
|7 PORT_7
|8 PORT_8
|S Server
|P Password
|A Authorized
|M Manager
|
| A
Return
|S Set
|C Clear
|
| C
Return
-> %DS90L-102, Authorized Mode Cleared
or
-> %DS90L-104, Power Down DS90L within one minute to Clear Authorize Mode
Clear Authorized Mode by Command Line
The command line for clearing authorized mode is:
-> Set A,C
Return
Enable and Disable Manager Mode
The Set command is used to enable and disable manager mode. Only
one port can be in manager mode at any time. To enable manager mode
you must know the unit’s password. Manager mode applies only to the
port on which it was enabled. Manager mode can be enabled for one port
at a time. Once manager mode is enabled for a port, that port remains
enabled until you disable it. Manager mode can be disabled with the
Set command, by disconnecting from the port (no session), or when the
terminal is powered down.