4–10
Managing the DECserver 90L
Setting Server Parameters By Command Line
Command line mode allows server parameters to be set with a single
entry.
The format for the command line is as follows:
->
SET S,<name>,<zero_counters>
Return
The following example shows how to set the server name to MYSERVER
and zero the counters.
->
SET S,MYSERVER,Z
Return
-> %DS90L-100, Parameters Have Been Changed
->
Changing Password by Menu
The Set command is used to change the DECserver 90Ls password. The
password is a maximum of eight characters. To change the password, the
port you are using must be in manager mode.
To change the password interactively:
1.
Enter SET at the DECserver 90L prompt. The * indicates the port
you are attached to.
2.
Select password (P).
3.
Enter the old password.
NOTE
The old, new, and verify password entries are not echoed by
the DECserver 90L.
4.
Enter the new password.
5.
Enter the new password again to verify it.
