Managing the DECserver 90L
4–23
Command Line
The DECserver 90L user interface provides a command line interpreter
as an alternate means to set and show port and server parameters. The
command line interpreter helps with the control of the DECserver 90L
by network management software and by users who want to bypass the
menu interface.
For command line entries, the commands and parameters are not entered
through a menu on the terminal screen. The user’s input is echoed and
the complete command is processed after a
Return
is entered. Note that
any error in parsing a command will cause the entire command to be
ignored.
A space is required between the command (set or show) and its
parameters. The command line interpreter uses comas (,) as a delimiter
to separate the different fields in a command line. To make the command
line interpreter easier to use the current value (default) for a field will be
used when:
1.
There is no entry for a field.
2.
A
Return
is entered before all the parameters have been entered.
The following are the command lines that can be entered at the
DECserver 90L prompt (->).
Set Port Parameters:
->SET <port>,<name>,<speed>,<IFC>,<OFC>,<device>,<break>,<rem_mod>,<test>
-------------------------------------------------------------------
1
1200
E
E
T
L
E
Y
2
2400
D
D
P
R
D
N
3
4800
C
C
4
9600
5
19200
6
38400
7
8
Set Server Parameters:
-> SET S,<name>,<actions>
------------------
N
Z
F
