4–8
Managing the DECserver 90L
Table 4–2
Server Parameters
Field
Description
Name
Maximum of 16 characters. The following characters can be
used: alpha, numeric, -, _, $.
Actions
Zero the servers network counters and reset the server
N = No action taken
Z = Zero network counters
F
3
= Reset all settable parameters to factory default settings
3
All sessions are disconnected
Setting Server Parameters from the Menu
To set server parameters from the menu:
1.
Enter SET at the DECserver 90L prompt. The * in the menu
indicates the port you are attached to.
2.
Select Server (S).
3.
Set the parameters in response to the prompts. The * indicates the
current setting of the parameter. The setting of each parameter is
terminated with a
Return
. Entering a
Return
with no input for a
parameter leaves the field unchanged. If an incorrect entry is made,
the DECserver 90L signals the error and waits for a correct entry.
