Managing the DECserver 90L
4–17
Disable Manager Mode by Command Line
The command line for disabling manager mode is:
->
Set M,D
Return
Show Command
The Show command allows you to show port or server parameters, status,
and counters.
Show Port
The Show Port command displays the status for each of the eight ports
of the DECserver 90L. Table 4–3 describes each of the fields in the port
status display.
Table 4–3
Port Status Description
Field
Description
Name
Shows the name of each port.
Speed
Shows the receive/transmit speed.
In Flow
Tells if the input flow control is enabled or disabled and gives
its current state (on/off).
Out Flow
Tells if the output flow control is enabled or disabled and gives
its current state (on/off).
Type
Tells if the device type is set for a terminal or printer.
Break
Tells if the port is set for local or remote break.
Rem Mod
Tells if remote modify is enabled or disabled.
Test
Tells if the loopback test is active.
Status
Tells if the port is connected to a service, local (the terminal is
at the DECserver 90L prompt), or off.
Service
Tells the name of the service to which a port is connected.
Node
Gives the name of the node to which a port is connected.
Port
Gives the name of the port on the node the DECserver 90L to
which a port is connected.
Frame Err
A counter that gives the number of framing errors for a port.
Queued
Printer ports only. Lists jobs queued to the port (maximum of
seven plus one active).