Operation
3–3
‘‘Last Number Redial’’
Last number redial allows a port to connect to the last service accessed
without entering the service or node name. This is done by entering the
connect command ‘‘>’’ or C[ONNECT] at the DECserver 90L prompt and
pressing
Return
. The following example shows how to use the last number
redial feature to reconnect to node MYNODE.
$
LO
Return
USER logged out at 01-JAN-1991 16:55:00.00
->
>
Return
%DS90L-100, Connection Established
Welcome to MYNODE running VMS 5.4
Username:
Interrupting a Terminal Session
You can interrupt a terminal session and return to the DECserver 90L
prompt by pressing the
Break
key on the terminal. When you press the
Break
key, the session is interrupted, not ended, and the DECserver 90L
prompt appears as follows:
->
At this point you can issue a show or set command, resume the
interrupted session, or end the session.
Resuming an Interrupted Terminal Session
To resume an interrupted terminal session, type the connect command ‘‘>’’
or RESU[ME] at the DECserver 90L prompt. The following is an example
of resuming an interrupted terminal session.
->
>
Return
When you resume an interrupted session, control is returned to the point
at which the session was interrupted.
