Managing the DECserver 90L
4–7
The following example shows how to set port 8 for use with a printer
(user entries are bolded). The following port parameters are set in this
example.
Port name: PRINT
Speed: 9600
Input flow: Remains unchanged
Output flow: Remains unchanged
Device type: Printer
Break: Remote
Remote modify: Remains unchanged
Test: Remains unchanged
->
SET 8,PRINT,9600,,,P,R,,
Return
-> %DS90L-100, Parameters Have Been Changed
->
Setting Server Parameters
The following server parameters can be set:
•
Server name
•
Zero counters
•
Reset server and ports to factory default settings
Note: Disconnects all sessions
Table 4–2 describes each of the parameters that can be set.
Server parameters can be set from a menu or by a command line entered
at the prompt. The following sections describe how to set the server
parameters using both methods.
If authorized mode is set, you must first enable manager mode.