Overview
1–3
3.
Connect a working terminal to one of the terminal ports. Refer to
Table 1–1 for supported terminal characteristics.
4.
Turn the power on to the terminal and press
Return
twice to get the
DECserver 90L prompt (->).
Pressing
Return
twice causes the green activity LED to blink and
automatically sets the port’s baud rate.
5.
Enter the name of the network node you want to connect to and press
Return
. The DECserver 90L will display a string of dots ‘‘.....’’, one per
second, until the connection is made.
For more detailed information on installing and using the DECserver 90L
refer to Chapter 2, Installation and Chapter 3, Operation of this manual.
Table 1–1
Supported Terminal Characteristics
Characteristic
Setting
Transmit speed
1200 to 38.4K
Receive speed
Receive = Transmit
Flow control
XON/XOFF
Data and parity
8 Bits, No Parity
Stop bits
1
Figure 1–2 shows the DECserver 90L and calls out its features.
