Operation
3–5
Table 3–1
DECserver 90L User Commands
Symbol/Command
Function
-> service
At the prompt "->", enter the name of the
service with which you want to establish a
terminal session.
-> service node port
Establish a terminal session with the service,
node, and port specified. The node and port
are optional.
-> C[ONNECT]
3
service node
port
Establish a terminal session with the service,
node, and port specified. The node and port
are optional. This command should be used
to establish a terminal session when a service
name conflicts with one of the DECserver 90L
commands.
->
Break
Interrupt a terminal session.
->
>
Connect to last service used or resume an
interrupted terminal session.
-> RESU[ME]
3
Resume an interrupted terminal session.
->
<
Disconnect an interrupted terminal session
or disconnect the port. Disconnecting the
port returns the port to the power-up state
(non-autobaud).
-> D[ISCONNECT]
3
Disconnect an interrupted terminal session
or disconnect the port. Disconnecting the
port returns the port to the power-up state
(non-autobaud).
-> Set
Set port or server parameters.
-> Show
Show port or server parameters.
-> Reset
Reset port or server parameters to power-up
state.
-> ? or Help
List DECserver 90L commands.
3
The characters in brackets [ ] do not need to be entered for the DECserver 90L to recognize
the command.
