Managing the DECserver 90L
4–13
Setting the Authorized Operation by Command Line
The command line for setting authorized mode operation is:
->
Set A,S,<password>
Return
NOTE
The password is echoed when using command line entry.
Clear Authorized Mode by Menu
Clearing authorized mode disables security on the DECserver 90L. To
clear authorized mode your port must be in manager mode or you must
have physical access to the unit. Physical access to the unit is required
when the units password is not known.
To clear authorized mode from the menu:
1.
Enter SET at the DECserver 90L prompt. The * indicates the port
you are attached to.
2.
Select Authorized (A).
3.
Select Clear (C).
4.
If the port you are connected to is not in manager mode, the unit’s
power will have to be cycled off and then on.
