manualshive.com logo in svg

Diagnostic Instruments SPOT, Руководство пользователя

Поделиться
Скачать
Diagnostic Instruments SPOT Скачать руководство пользователя страница 2

Single User Copyright and License Agreement, Diagnostic Instruments

Carefully read the following terms and conditions before using the software.  By using the software
on the enclosed CD, you indicate your complete and unconditional acceptance of these terms and
conditions.

This document is a legal agreement between you, the end user, and Diagnostic Instruments, concerning the
use of the enclosed software.  This agreement constitutes the complete agreement between you and
Diagnostic Instruments.

If you do not agree to the terms of this agreement, do not use the CD.  Promptly return the CD,
including the written materials, the binder, and all other equipment/containers to the dealer where
you purchased them from.  You will receive a full refund.

1.

 

LICENSE:

  Diagnostic Instruments grants you the LICENSEE, a limited, non-exclusive license to use

the enclosed software.  You may physically transfer the Software from one computer owned or leased
by you to another, provided that the Software is used on only one computer at a time.  You may not
electronically transfer the Software from one computer to another over a network.  You may make a
copy of the Software for backup and archival purposes, provided that the original copyright notice
an/or other legend is reproduced on each copy.  Except for backup purposes, you may not make or
distribute copies of the Software.  You may not modify, translate, adapt, reverse engineer, decompile,
disassemble, or create derivative words based on the Software.  If you wish to use the Software on
more than one computer, you must license another copy of the software for each computer.

2.

 

TITLE:

  Diagnostic Instruments retains title to the Software, subject to your right to possess and use

the software while the License is in effect.  You will agree to use your best efforts to protect the
software from unauthorized use, illegal reproduction, or illicit distribution.

3.

 

COPYRIGHTS

 and 

TRADE SECRETS:

  Diagnostic Instruments owns all rights regarding the

Software.  This agreement does not convey ownership of the software to you, but only the right to use
a copy of the software strictly in accordance with this agreement.  The unauthorized duplication or
distribution of the software or the documentation is an infringement of Diagnostic Instruments' rights
to the software and may be subject to criminal and/or civil penalties.

4.

 

UPDATE POLICY: 

 In order to receive updates to the Software, you must complete and return the

enclosed registration card to Diagnostic Instruments.  All updates provided to you shall become part of
the software governed by the terms of this agreement.

5.

 

GENERAL:

  This agreement merges all prior written and oral communication regarding the Software

and sets forth the entire agreement of the parties.  This agreement shall be governed by the laws of the
state of Michigan, without regard to the conflict of law provisions thereof, as if it was performed
wholly within the state.

Copyright and Trademark Information

Copyright 1997-1998 by Diagnostic Instruments, Inc.
All rights reserved.

Trademarks:

SPOT is a registered trademark of Diagnostic Instruments, Inc.
Windows 95 and Windows NT are registered trademarks of Microsoft, Inc.
Adobe Photoshop is a registered trademark of Adobe Systems Incorporated.

All other product names mentioned in this document are the property of their respective trademark holders.

Содержание SPOT

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды