manualshive.com logo in svg

Diagnostic Instruments SPOT, Руководство пользователя

Поделиться
Скачать
Diagnostic Instruments SPOT Скачать руководство пользователя страница 134

Appendix B

Changing the Desiccant

User's Guide to the SPOT Cooled Color Digital Camera, 6/9/98

134

Introduction

After a period of time, depending on camera use and ambient humidity levels, the
desiccant in the camera head can become saturated with moisture and lose its
effectiveness.  At this point, frost will start to form on the chip and image quality will
deteriorate.  Fortunately, changing the desiccant is easy and relatively inexpensive.  You
can either do it yourself, or arrange for Diagnostic Instruments to do it for you.

Do It Yourself Steps

Follow these steps to change the desiccant in your SPOT camera.

1.

 

Contact Diagnostic Instruments and order a desiccant changing kit (P/N SP700-
100).

 This kit contains a jar of desiccant packets, tweezers, a 3/8” allen wrench, and a

roll of Teflon tape.

2.

 

Remove the camera from the microscope.

Follow these steps:

a)

 

Turn off your computer and the SPOT power supply.

b)

 

Disconnect both the computer cable and the power supply cable from the SPOT
camera head.

c)

 

Disconnect the camera head from the microscope coupler.

d)

 

Attach the plastic lens cap to the front of the camera.

3.

 

Pick a non-drafty, non-dusty, non-humid work environment.

An air-conditioned office is usually good.

4.

 

Use the 3/8” Allen wrench to unscrew the large silver plug on the side of the
camera.  

Turn the screw counter-clockwise.

5.

 

Remove the old desiccant.

Use the tweezers to pluck the old desiccant packet out of the hole.

6.

 

Install the new desiccant.

Before dropping the packet into the hole, push in the ends of the packet; this causes
the ends to “pucker” and the packet to assume a cylindrical shape.  Try to minimize
the amount of time between opening the jar and re-sealing the camera.

7.

 

Replace the Teflon tape on the silver plug.

Remove all of the old Teflon tape from the threads on the plug.  Carefully wrap three
layers of new Teflon tape around the plug threads (don’t look for a sticky side to this
tape, there is none).  After the first layer is wrapped on, apply some tension to the
tape while winding so that the tape conforms to the shape of the threads.

Содержание SPOT

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды