DH Instruments E-DWT-10000-AF, Руководство по эксплуатации и обслуживанию

Страница: 99 / 134

4. REMOTE OPERATION
Page 89 © 2008 DH Instruments, a Fluke Company
UDU
Purpose Read or set the user defined pressure unit.
Command
Query “UDU label, ucoef ”
“UDU?”
Classic “UDU= label, ucoef ”
“UDU”
label: User unit label (4 alphanumeric char maximum). It cannot be an already
supported unit label.
Ucoef : “User unit conversion coefficient (units/Pa).
Default “UDU USER,1.0”
Remarks The user defined unit must be set up with the program message prior to remote or local
selection.
Example
(enhanced) Cmd Sent:
Query reply: “UDU MYUN, .001”
“MYUN, 0.001000”
(No reply if GPIB-488)
Example
(enhanced) Cmd Sent:
Query reply: “UDU? MYUN, .001”
“MYUN, 0.001000”
Example
(enhanced) Sent:
Reply: “UDU=MYUN, .001”
“MYUN, 0.001000”
Errors
See Also 3.9.6, 3.7.3
ULn
Purpose Read or set an upper limit for the specified or active Q-RPT.
Command
Query “Ul n limit ”
“Ul n ?”
Classic “Ul n = limit ”
“UL n ”
Optional Suffix “n” A suffix may be used instead of “ RptLabel ”
‘1’ Specify the Hi Q-RPT
‘2’ Specify the Lo Q-RPT
Arguments “limit": The upper limit pressure in the specified Q-RPT’s current pressure unit and
measurement mode.
Remarks The RPM4-E-DWT has an upper limit for each range and for each measurement mode (gauge,
absolute, and differential). If the pressure does exceed the upper limit, the pressure display
flashes. This feature should always be used to prevent accidental over pressure of a device
under test.
Example
(enhanced) Cmd sent:
Query reply: “UL 1000”
“1000.00 kPa g”
Example
(enhanced) Cmd sent:
Query reply: “UL? 1000”
“1000.00 kPa g”
Example
(classic) Sent:
Reply: “UL=1000”
“1000.00 kPa g”
Errors ERR# 6: The “ limit ” argument is out of range.
See Also 3.8.4