DH Instruments E-DWT-10000-AF, Руководство по эксплуатации и обслуживанию

Страница: 78 / 134

E-DWT-10000-AF OPERATION AND MAINTENANCE MANUAL
© 2008 DH Instruments, a Fluke Company Page 68
Table 9. Reset – Cal
RESET RESULT SEE SECTION
All Q-RPT Calibration
Coefficients PA to zero, PM to 1 5.3.1.1
On-board Barometer
Calibration Coefficients PA to zero, PM to 1 5.2.2
Calibration Date Set all dates to 19800101 5.3.7, 5.2.2
AutoZ value 101325 Pa
Gxxx, BGxxx Q-RPTs: All P
offset
values to zero
3.9.1
AutoZ function ON, all Q-RPTs 3.9.1
3.9.9.5 <5 ALL>

PURPOSE
The reset - all function clears and deletes large amounts of user defined
information including critical calibration data.
Combines all resets in one global reset command that clears the entire user
section of non-volatile memory except the ID function (see Section 3.9.5.4) and
the security level password (see Section 3.9.5.5) returning RPM4-E-DWT to the
“as delivered” condition. The Reset – All resets are itemized in Table 10.
Table 10. Reset – All
RESET RESULT SEE SECTION
Reset – Sets All the resets of Reset - Sets 3.9.9.1
Reset – Units All the resets of Reset - Units 3.9.9.2
Reset – Atest All the resets of Reset - ATest 3.9.9.3
Reset – Cal All the resets of Reset - Cal 3.9.9.4
Remote Interfaces COM1, COM2 interfaces to default settings. 3.9.2
Remote Communications Remote command format to Classic 3.9.2.3
Level (Security) Reset security level to low 3.9.5.5