DH Instruments E-DWT-10000-AF, Руководство по эксплуатации и обслуживанию

Страница: 48 / 134

E-DWT-10000-AF OPERATION AND MAINTENANCE MANUAL
© 2008 DH Instruments, a Fluke Company Page 38
To go to a DISPLAY other than Q-RPT , press [DISPLAY] and make a new
DISPLAY choice (see Section 3.7.7).
3.7.7.5 Hi/Lo

PURPOSE
To activate the Hi/Lo DISPLAY.
See Section 3.7.7,  Principle.

OPERATION
To activate the Hi/Lo DISPLAY press [DISPLAY] , <5Hi/Lo> . Pressing <5Hi/Lo>
resets the Hi/Lo values and returns to the main run screen with the Hi/Lo
DISPLAY active.
With the Hi/Lo DISPLAY active the main run screen is:
1. Highest pressure observed since Hi/Lo reset.
2. Lowest pressure observed since Hi/Lo reset.
9911 psi g zHi
H 9922 L9800
The Hi/Lo values change each time a new Hi or Lo pressure is measured.
The Hi/Lo record can be reset at any time by pressing [ENT]. This allows a
Hi/Lo reset without going back through the DISPLAY menu.
If the pressure measurement unit, mode or range is changed while the Hi/Lo
DISPLAY is active, Hi/Lo resets.
To go to a DISPLAY other than Hi/Lo, press [DISPLAY] and make a new
DISPLAY choice (see Section 3.7.7).
3.7.7.6 Freeze

PURPOSE
To activate the Freeze DISPLAY.
See Section 3.7.7,

Principle.