Dell 1815dn Multifunction Mono Laser Printer Скачать руководство пользователя страница 80

Страница: 80 / 148

Do not use paper that you have cut or trimmed yourself.

Do not mix print media sizes, weights, or types in the same source; mixing results in jams.

Do not use coated papers.

Remember to change the paper size setting when you use a source that does not support auto size sensing.

Do not remove trays while a job is printing or Busy is displayed on the operator panel.

Make sure the paper is properly loaded in the source.

Flex paper back and forth. Do not fold or crease the paper. Straighten the edges on a level surface.

Selecting Preprinted Forms and Letterhead

Use the following guidelines when selecting preprinted forms and letterhead paper for the printer:

Use long grain papers for best results.

Use only forms and letterhead printed using an offset lithographic or engraved printing process.

Choose papers that absorb ink, but do not bleed.

Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-

resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 180° C (356°

F) without melting

or releasing hazardous emissions. Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidation-set or oil-based
should meet these requirements; latex inks might not.

If you are in doubt,

contact your paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 180° C (356°

F) without melting or releasing hazardous emissions.

Printing on Letterhead

Check with the manufacturer or vendor to determine whether the preprinted letterhead you have chosen is acceptable for laser printers.

Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the print media sources.

Print Media Source

Top of Page

Print Side

Portrait

Landscape

tray 1 (standard tray)

optional tray 2

Face down

Front of tray

Left side of tray

bypass tray

Face up

Logo enters the printer first

Left side of tray

Содержание 1815dn Multifunction Mono Laser Printer





















































































































































Результаты поиска

Содержание 1815dn Multifunction Mono Laser Printer

Отзывы:

Похожие инструкции для 1815dn Multifunction Mono Laser Printer

Бренды по названию

Популярные бренды

Dell 1815dn Multifunction Mono Laser Printer, Руководство пользователя

Результаты поиска

Содержание 1815dn Multifunction Mono Laser Printer

Отзывы:

Похожие инструкции для 1815dn Multifunction Mono Laser Printer

Бренды по названию

Популярные бренды