ImageCard/UltraGrafix (Express and Select Classes) User’s Guide
1-7
•
To pause the printer, press and hold the Ready button for three seconds
or less. The status light continues to blink green while the printer is
paused. Press the Ready button again to resume printing.
•
To halt the current print job, first press the Ready button to pause the
printer. When you hear an audible sound, press and hold the Ready
button for between three and ten seconds. When the sound changes
tone, release the Ready button.
•
You can verify that the printer is working correctly by making a printer
test card. See Printing test cards in Chapter 2 for more information.
Power button – The power button allows you to power on or power off the
printer.
ice0008
Power supply fan
Power receptacle
ECP parallel
port
Smart card data
port (used only
on printers with
the smart card
option)
Figure 1:-4 Printer back part names (Express and S models)
ECP parallel port – The ECP parallel port is the port for connecting the
printer's interface cable to the PC.
Power receptacle – This is the receptacle for connecting the power cable.
Power supply fan – The power supply fan cools the power supply
components in the printer.
Smart card data port — On printers equipped with the smart card option,
this connector is for the cable from the PC that carries the data to encode on
the smart card chip.