9-68 Status Word 1
Range:
Function:
0
*
[0 - 65535 ] This parameter delivers the status word for a
Master Class 2 in the same format as PCD 2.
9-70 Edit Set-up
Option:
Function:
Select the set-up in which programming
(change of data) is performed during operation.
It is possible to program the 4 set-ups
independently of the set-up selected as active.
Parameter access from each master is directed
to the set-up, which is selected by the
individual master (cyclic, acylic MCL1, first
acyclic MCL2, second acyclic MCL2, third acyclic
MCL2).
[1]
Set-up 1
[2]
Set-up 2
[9]
*
Active Set-
up
9-71 Profibus Save Data Values
Option:
Function:
Parameter values changed via 485 are not
automatically stored in a non-volatile memory.
Use this parameter to activate a function that
stores parameter values in the EEPROM non-
volatile memory, so changed parameter values
are retained at power-down.
[0]
*
Off
Deactivates the non-volatile storage function.
[1]
Store all
setups
Stores all parameter values in the set-up selected
in
in the non-volatile
memory. The selection returns to
[0] Off
when all
values have been stored.
[2]
Store all
setups
Stores all parameter values for all set-ups in the
non-volatile memory. The selection returns to
[0]
Off
when all parameter values have been stored.
9-72 ProfibusDriveReset
Option:
Function:
[0]
*
No action
[1]
Power-on reset
Resets frequency converter after power-
up, as for power cycle.
[2]
Power-on reset
prep
[3]
Comm option
reset
When reset, the frequency converter
disappears from the fieldbus, which may
cause a communication error from the
master.
NOTICE
Resets the PROFIBUS option only.
9-75 DO Identification
Range:
Function:
0
*
[0 - 65535 ] Provides information about the DO (Drive
Object).
9-80 Defined Parameters (1)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-81 Defined Parameters (2)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-82 Defined Parameters (3)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-83 Defined Parameters (4)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-84 Defined Parameters (5)
Range:
Function:
0
*
[0 - 9999 ]
9-85 Defined Parameters (6)
Range:
Function:
0
*
[0 - 9999 ]
9-90 Changed Parameters (1)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the frequency
converter parameters deviating from default
setting.
9-91 Changed Parameters (2)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the frequency
converter parameters deviating from default
setting.
9-92 Changed Parameters (3)
Range:
Function:
0
*
[0 - 9999 ] This parameter shows a list of all the frequency
converter parameters deviating from default
setting.
Parameter Descriptions
VLT
®
AutomationDrive FC 360
82
Danfoss A/S © 7/2015 All rights reserved.
MG06C602
4
4
