Danfoss VLT Automation Drive FC 360, Руководство по программированию

Страница: 140 / 156

5.2.16 17-** Feedback Options
Par. No. # Parameter description Default value 2-set-up Change
during
operation
Conversion
index
Type
17-1* Inc.Enc.Interface
17-10 Signal Type [1] RS422 (5 V TTL) All set-ups FALSE – Uint8
17-11 Resolution (PPR) 1024 N/A All set-ups FALSE 0 Uint16
17-5* Resolver Interface
17-50 Poles 2 N/A 1 set-up FALSE 0 Uint8
17-51 Input Voltage 7 V 1 set-up FALSE -1 Uint8
17-52 Input Frequency 10 kHz 1 set-up FALSE 2 Uint8
17-53 Transformation Ratio 0.5 N/A 1 set-up FALSE -1 Uint8
17-56 Encoder Sim. Resolution [0] Disabled 1 set-up FALSE – Uint8
17-59 Resolver Interface [0] Disabled All set-ups FALSE – Uint8
17-6* Monitoring and App.
17-60 Feedback Direction [0] Clockwise All set-ups FALSE – Uint8
17-61 Feedback Signal Monitoring [1] Warning All set-ups TRUE – Uint8
5.2.17 18-** Data Readouts 2
Par.
No. # Parameter description Default value 4-set-up Change
during
operation
Conversion
index
Type
18-8* Center Winder Readout
18-81 Tension PID Output 0 Hz 1 set-up TRUE -3 Int32
18-82 Center Winder Output 0 Hz 1 set-up TRUE -3 Int32
18-83 Line Speed 0 Hz 1 set-up TRUE -3 Int32
18-84 Diameter 0% 1 set-up TRUE -3 Int32
18-85 Tapered Tension Set Point 0% 1 set-up TRUE -1 Int32
18-86 Tension Feedback 0% 1 set-up TRUE -1 Int32
18-9* PID Readouts
18-90 Process PID Error 0% All set-ups FALSE -1 Int16
18-91 Process PID Output 0% All set-ups FALSE -1 Int16
18-92 Process PID Clamped Output 0% All set-ups FALSE -1 Int16
18-93 Process PID Gain Scaled Output 0% All set-ups FALSE -1 Int16
Parameter Lists
VLT
®
AutomationDrive FC 360
138 Danfoss A/S © 7/2015 All rights reserved. MG06C602
5 5