![background image](http://html.mh-extra.com/html/danfoss/fc-300/fc-300_design-manual_507599236.webp)
Digital Inputs:
Numbers
7
Range
0/24V
Mode
PNP/NPN
Input impedance
5 hp [4 kW]
Low trigger level
6.4 V
High trigger level
17 V
Maximum thru-put delay
10 ms
Analog Outputs:
Numbers
2
Range
0/4–20 mA
Resolution
11 bit
Linearity
<0.2%
Analog Outputs:
Numbers
2
Range
0/4–20 mA
Resolution
11 bit
Linearity
<0.2%
EMC:
EMC
IEC 61000-6-2 and IEC 61800-3 regarding Immunity of BURST, ESD, SURGE and Conducted Immunity
10.9 MCF 106 A/ B in C Option Adaptor
The A/ B in C option adaptor is a C option that makes it possible to combine a number of different options.
130BB093.10
Figure 10.6: Drawing of MCF 106 A/B in C option adaptor. Two options can be installed in the MCF 106 at the same time. The upper slot is
called E0 and the lower is called E1.
One A and one B option can be installed in the standard A and B slots of the control card – behind the LCP/ blind cover. With the addition of the MCF
106 the possibilities are increased.
•
Up to three different B options – one in the standard B slot and two in the adaptor
10 Options and Accessories
FC 300 Design Guide
10-16
MG.33.BC.22 - VLT
®
is a registered Danfoss trademark
10