![background image](http://html.mh-extra.com/html/danfoss/fc-300/fc-300_design-manual_507599165.webp)
Figure 8.12: Motor connection frame size C1 and C2 (IP 21/
NEMA Type 1 and IP 55/66/ NEMA Type 12)
Figure 8.13: Motor connection for frame size C3 and C4.
Figure 8.14: Cable entry holes for frame size B1. The sug-
gested use of the holes are purely recommendations and
other solutions are possible.
Figure 8.15: Cable entry holes for frame size B2. The sug-
gested use of the holes are purely recommendations and
other solutions are possible.
Figure 8.16: Cable entry holes for frame size C1. The sug-
gested use of the holes are purely recommendations and
other solutions are possible.
Figure 8.17: Cable entry holes for frame size C2. The sug-
gested use of the holes are purely recommendations and
other solutions are possible.
Term. no.
96
97
98
99
U
V
W
PE
1)
Motor voltage 0–100% of AC line voltage.
3 wires out of motor
U1
V1
W1
PE
1)
Delta-connected
W2
U2
V2
6 wires out of motor
U1
V1
W1
PE
1)
Star-connected U2, V2, W2
U2, V2 and W2 to be interconnected separately.
1)Protected Ground Connection
FC 300 Design Guide
8 Electrical Installation
MG.33.BC.22 - VLT
®
is a registered Danfoss trademark
8-7
8