•
Connect the control cables and fasten the cables with the enclosed cable strips.
•
Make sure the length of the stripped wire is correct (see the following drawing).
•
Do not mix live parts (high voltage) with control signals (PELV).
•
Fit the enlarged LCP fixture and enlarged terminal cover.
•
Replace the LCP.
•
Connect power to the adjustable frequency drive.
•
Select the relay functions in par. 5-40
Function Relay
[6-8], par. 5-41
On Delay, Relay
[6-8] and par. 5-42
Off Delay, Relay
[6-8].
NOTE!
Array [6] is relay 7, array [7] is relay 8, and array [8] is relay 9
Do not combine 24/ 48 V systems with high voltage systems.
FC 300 Design Guide
10 Options and Accessories
MG.33.BC.22 - VLT
®
is a registered Danfoss trademark
10-11
10