Installation Guide
ECL Comfort 210 / 310, application A214 / A314
6.7 Key functions
New application
Erase application:
Removes the existing application. As
soon as the ECL key is inserted, another
application can be chosen.
Application
Gives an overview over the actual
application in the ECL controller. Push
the dial again to exit the overview.
Factory setting
System settings:
System settings are, among others,
communication set-up, display
brightness etc.
User settings:
User settings are, among others, desired
room temperature, desired DHW
temperature, schedules, heat curve,
limitation values etc.
Go to factory:
Restores the factory settings.
Copy
To:
Copy direction
System settings
User settings
Start copying
Key overview
Gives an overview over the inserted ECL
key. (Example: A266 Ver. 2.30).
Turn the dial to see the subtypes. Push
the dial again to exit the overview.
A more detailed description of how to use the individual ‘Key
functions’ can also be seen in ‘Inserting the ECL application key’.
The “Key overview” does not inform — through ECA 30 / 31 — about
the subtypes of the application key.
Key inserted / not inserted, description:
ECL Comfort 210 / 310, controller versions lower than 1.36:
-
Take out the application key; for 20 minutes
settings can be changed.
-
Power up the controller
without
the
application key inserted; for 20 minutes
settings can be changed.
ECL Comfort 210 / 310, controller versions 1.36 and up:
-
Take out the application key; for 20 minutes
settings can be changed.
-
Power up the controller
without
the
application key inserted; settings cannot be
changed.
178
DEN-SMT/DK
VI.GU.A2.02
Danfoss District Energy
