CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 37 / 118

4
CUES Inc. , LAMPII User Manual | LM903
33
www.cuesinc.com , | salesinfo@cuesinc.com
IMPORTANT NOTES:
•
For existing units: If the rear housing does not have the two holes shown in the image in
step 4 above, it must be sent to CUES for modification prior to rear view camera installation.
•
Rear-view camera operation requires a K2/Summit control system or a panel-mounted
rear-view camera toggle switch for non-K2/Summit systems.
•
The LAMPII Rear-View Camera requires K2 firmware version R021 or later for K2/Summit-
equipped systems.
•
Front/rear/lateral camera image is switched from the K2 controller (Game Pad or
hand-held controller), truck panel, or PCU switch depending on the system configuration.
3. Push down and insert the connector as
shown. Align the pins on the swivel lock and
rotate to the locked position.
4. Rotate the camera down and align the screws with the holes that are located on the motor
housing as shown. Push the camera down to secure.
3
4