CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 118

4
CUES Inc. , LAMPII User Manual | LM903
27
www.cuesinc.com , | salesinfo@cuesinc.com
INSTALL THE STRAIN RELIEF CABLES:
1. Position the strain relief clamp on the push cable flush with the end of the cable fitting.
2. Adjust the strain relief clamp on the lateral video cable such that both the cables and
strain relieving wire ropes are taught.
3. Mark the position of the strain relief clamp on lateral video cable.
4. Move the strain relief clamp .25-.5 inches away from the mark to create slack in video
cables. (This equates to the strain relief being approximately 2 inches from the end of
the cord grip spring).
5. Tighten the screws on the strain relief clamps.
6. Ensure the wire rope strain relief cables are taught and the video cables have some
slack.