CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 26 / 118

4
22
CUES Inc. , LAMPII User Manual | LM903
www.cuesinc.com , | salesinfo@cuesinc.com
SYSTEM SET-UP & INSTALLATION
WHEN USING THE MINI P&T CAMERA COMPATIBLE LAMPII VERSION:
If using the CUES Mini Pan & Tilt Camera with the LAMPII, perform the steps listed in the previous
procedure as well as the following:
To uninstall and/or reinstall the push cable when using the Mini Pan & Tilt Camera compatible LAMPII
version, it’s necessary to remove and/or install the underbody push cable guide, P/N LM730, as follows:
1. Using an Allen Wrench, remove the (4) screws located on the cable guide.
2. Install the push cable per the previous procedure: Install the push cable into the LAMPII prior
to attaching the camera (not shown).
3. Always apply blue thread locker, P/N CS036, to screws prior to re-installation. Using an Allen
Wrench, reinstall the (4) screws.