CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 118

1
CUES Inc. , LAMPII User Manual | LM903
1
www.cuesinc.com , | salesinfo@cuesinc.com
The self-propelled lateral inspection / pan and tilt
mainline inspection system, referred to as LAMPII
throughout the manual, is available in several
different configurations.
This manual includes operating instructions for the
LAMPII system. Equipment information is included
in the
Equipment Overview chapter in this manual.
The instructions in this manual are for multi-
conductor inspection systems. The multi-conductor
cable is approximately ½" in diameter and contains
8 to 12 conductors depending on the age of
the system. Twelve conductors are required to
operate the LAMPII system. If uncertain about the
type of system, please call our Customer Service
Department at 1-800-327-7791.
The LAMPII is designed to:
•
Operate as one component of a
multiconductor inspection system.
•
Operate on up to 1000 feet of multi-
conductor cable utilizing dual cable reels.
•
Perform one-pass inspections of 6 through
36 inch mainline sewer pipes and house
lateral pipes 3 - 8 inches in diameter.
•
Display both lateral and mainline footage
with picture in picture (PIP) capabilities.
•
Optional Chute & Tube Kits are available to
adapt the LAMPII to larger pipe diameters
The LAMPII operates as part of any new or existing
CUES multi-conductor system (including steerable).
All existing CUES multi-conductor systems can be
retrofitted to operate the LAMPII.
If the LAMPII is being installed on an existing
TV only or TV seal system, modifications to the
truck equipment layout and electrical wiring will
be required. For more information, please call our
Customer Service Department at 1-800-327-7791.
LAMPII INTRODUCTION
LAMPII with LATERAL PAN & TILT CAMERA OPTION
FIBERGLASS CABLE OPTION