CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 61 / 118

6
CUES Inc. , LAMPII User Manual | LM903
57
www.cuesinc.com , | salesinfo@cuesinc.com
PIP OPERATION - CONTINUED
NOTE: The telpix unit was designed to accept up to four separate video sources. Only two inputs
are used with cues equipment. The unit has an internal “alarm” mode which cannot be disabled. If
any of the video input signals are interrupted, the unit will display the four quadrant screen briefly
(the “alarm” screen) and then return to the front panel setting. This is normal operation
of the unit and may occur whenever the front panel toggle switches are toggled.
For the following steps, refer to view below:
1. Place the two toggle switches located on the right mounting bracket to the UP positions
(“PiP” and “MAIN/LAT”).
2. Turn unit ON with the front panel POWER switch. All eight green LED’s should
illuminate and the unit should produce several “beeps”.
3. After several seconds, all LED’s should extinguish except for the first. This is the four
quadrant display button, and the monitor should display four quadrants on the screen.
4. Press the second button for the PiP display. The first led should extinguish and the second
and third led’s should illuminate. This is the PiP mode. The monitor should show the
mainline camera in the background and the lateral camera in the PiP window.
5. All other Telpix front panel buttons should be left unused.
FRONT PANEL TOGGLE SWITCH OPERATION
1. The left toggle switch labeled PiP and FULL either places the PiP window in the lower
right of the monitor or removes it from the screen completely. When in the FULL mode,
only the camera providing the background image will be displayed.
2. The right toggle switch labeled MAIN/LAT and LAT/MAIN works accordingly:
A) MAIN/LAT places the mainline camera in the background and the lateral camera in
the PiP window.
B) LAT/MAIN places the lateral camera in the background and the mainline camera in
the PiP window.
THE PIP SECTION BELOW IS
FOR 1208 PCU SYSTEMS ONLY!