CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 40 / 118

4
36
CUES Inc. , LAMPII User Manual | LM903
www.cuesinc.com , | salesinfo@cuesinc.com
SYSTEM SET-UP & INSTALLATION
When operating the LAMPII as a mainline transporter without the lateral camera and push cable, the
transporter head can bend at the articulated joint, potentially hitting an obstruction in the pipe due
to the lack of straightening force from the missing push cable or camera. An Immobilizing Block is
now available to keep the head straight when using the transporter without the lateral camera. It is
composed of three parts: one aluminum bottom piece with 2 dowel pins extending out of the sides,
one Delrin rounded cover top piece with a mounting hole, and one 3/8 socket head cap screw to
secure it.
This block will make the transporter a rigid, monolithic unit. Lowering the unit into the manhole will
require extra care as the head assembly will not pivot with the attached head immobilizing block.
IMPORTANT! Use care when handling! Careless handling may result in the camera hitting the
invert with all of the unit’s weight behind it.
The head immobilizing block can be field-retrofitted to all existing LAMPII units. Two immobilizing
blocks are available and both are designed for use with the LAMPII / fixed view lateral camera
configurations. For camera heads with replaceable bump stops, which will be in in production the
beginning of 2016, use P/N LM758. For older assemblies, use P/N LM275. Note: The two versions
can be visually differentiated by the ridges present for the replaceable bump stops. Refer to the
figures on the opposite page.
continued...
HOW TO INSTALL THE IMMOBILIZING BLOCK