CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 118

4
CUES Inc. , LAMPII User Manual | LM903
19
www.cuesinc.com , | salesinfo@cuesinc.com
Attach the Spring End to the Push Cable:
NOTE: Prior to mating the cable, ensure that both internal and external threads are clean
of any debris, and then lubricate with anti-seize, CUES P/N #940700.
1. Align the visual markers and guide pins and mate the connector ends together.
2. Thread the spring end nut completely, ensuring
the o-ring is covered and no physical play
can be felt between the ends.
Note: Ensure that alignment between the
connectors is maintained while threading.
Permanent damage may occur if fastened
while misaligned.
3. Tighten with a wrench.
4. Snap the C-Clip over the flats between
the nut and spring where shown.
NOTE: The C-Clip must be removed in
order to disassemble the spring adapter
from the push cable.
FOR FIBERGLASS PUSH CABLE ASSEMBLIES ONLY:
3
4
1
2