CUES LAMP II, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 118

3
CUES Inc. , LAMPII User Manual | LM903
7
www.cuesinc.com , | salesinfo@cuesinc.com
I Optional Chute & Tube Kits are available to adapt the LAMPII to larger pipe diameters
LAMPII LARGE PIPE EQUIPMENT
LM297, MODULAR
CHUTE TUBE
To support large pipe inspections, modular chutes are available for LAMPII. The chutes are designed
for use in pipe sizes ranging from 18 to 36 inches in diameter. Large 14” wheels are included in Kit
P/N LM931, Angled Chute Kit, and can also be purchased separately. The large wheels are utilized to
increase bottom clearance.
The chutes consist of a breech and of a set of three clear polycarbonate tubes, P/N LM297-1 through
-4, for 18-36 inch pipes. The tubes are inserted and secured into the breech according to pipe size.
Two breeches are available: one straight, for use with the standard wheels, P/N LM362, and an angled
one, P/N LM363, for use with the large wheels, P/N LM935.
Note: The Mini P&T Camera will not
retract into the LAMPII cradle from the chute breech. When retrieved, it should remain in the
chute breech.
P/N LM935 (Kit, Adapter, K2 Wheels to LAMPII) is available when mounting the large 14” Pneumatic
Wheels to the LAMPII.
For existing units, contact CUES Customer Service prior to installation to determine if the clutch is
adjusted properly. Once this is accomplished, existing units can be field-retrofitted.
I
PIPE SIZE
36 in
30 in
24 in
LENGTHS TABLE
LAMPII shown in the standard configuration
with optional Large Wheels and Chute
LM297-4 5.5 in .14 lb 18 in