CSZ EZT-570i, Техническое руководство

Страница: 45 / 95

EZT-570i Technical Manual
45
Using a stylus, or the tip of a plastic pen cap, touch and hold on the center of each point marked by
the crosshairs on the screen. Once all points have been measured, touch anywhere on the screen to
accept the settings and complete the calibration routine.
Do not use any metal or sharp edged instruments on the screen or permanent damage
to the screen may result.
Figure 6-13 Touch Calibration Screen
Close the CECP settings window by pressing the “Quit” icon at the bottom right of the window. You
can then return to the normal operating screens and resume operation of the chamber.