CSZ EZT-570i, Техническое руководство

Страница: 53 / 95

EZT-570i Technical Manual
53
7.1.1.1 Custom Input Description of Use (DTS, VTS, TSB)
Basket Left (I6):
This control input is used to tell the EZT that the basket
(DTS/TSB) is in the left position/hot bath. There is no user
indication for this input.
Basket Right (I7):
This control input is used to tell the EZT that the basket
(DTS/TSB) is in the right position/cold bath. There is no user
indication for this input.
Basket Up (I30): This control input is used to tell the EZT that the basket
(VTS/TSB) is in the hot chamber/unload position. There is no
user indication for this input.
Basket Down (I31):
This control input is used to tell the EZT that the basket
(VTS/TSB) is in the cold chamber/down position. There is no
user indication for this input.
TSB Pump Pressure Safety (I45): The pump pressure safety input is used on TSB’s to indicate that
the hot or cold bath fluid pump has exceeded its maximum
operating pressure. This input is active low, i.e., the input must
be off in order for the alarm to be indicated. When active (input
off), the EZT shuts down the chamber until the alarm is
acknowledged (silence button pressed on alarm monitor screen)
and the input is off.
Bath Level Safety (I46):
The bath level safety input is used on TSB’s to indicate that a
bath is low on fluid (if equipped with level sensors). This input is
active high, i.e., the input must be on in order for the alarm to be
indicated. When active (input on), the EZT will sound the alarm
to obtain operator attention but will not shut down the chamber.
The alarm will be shown on the system status monitor screen.