Crystal Vision TANDEM-100, Руководство пользователя

Страница: 81 / 104

Crystal Vision
Installation
TANDEM-110 User Manual R1.8
80
07/07/2010
5.4 Monitoring Audio Outputs
The monitoring signals available at the Remote 1 and Remote 3 connectors at the rear of
the frame are dependent on the frame and the rear modules used:
2U Indigo and FR2AV Frame
RM36/RM07
slots RM05/RM08
slots REMOTE 1 pins
Analogue: L+, L-, R+, R- REMOTE 3 pins
Analogue: L+, L- R+, R-
1 7, 16, 17, 25
3 1, 2, 3 7, 16, 17, 25
5 4, 14, 13, 23
7 5, 6, 7 4, 14, 13, 23
9 10, 11, 19, 20
11 9, 10, 11 10, 11, 12, 20
GND 2 2
Analogue and (AES/EBU) monitoring
1U Indigo and FR1AV Frame
RM36/RM07
slots REMOTE 1 pins
Analogue: L+, L-, R+, R-
1 7, 16, 17, 25
3 4, 14, 13, 23
5 10, 11, 19, 20
GND 2
Analogue monitoring
Desktop box
RM36/RM07
slots REMOTE 1 pins
Analogue: L+, L-, R+, R-
1 9, 10, 11, 12
GND 2
Analogue monitoring
The RM04 rear module provides access to all GPIs and audio monitoring signals. The
Remote 1 and 3 frame rear connectors cannot be used to access TANDEM module audio
monitoring connections when the RM04 rear connector is used.
When using the triple card rear modules RM05 and RM08 in the FR2AV, only one
TANDEM card should be selected to output monitoring analogue audio at any one time.
Multiple audio signals could cause the audio to be attenuated and possibly distorted.
Select Audio Bus ON for the required TANDEM output, and Audio Bus OFF for the
other two TANDEM cards sharing the same rear module and monitoring outputs.