Crystal Vision
The active control panel
TANDEM-110 User Manual R1.8
34
07/07/2010
3.1 The TANDEM-110 menu structure
The main top-level menus for a module are obtained by pressing the F1, F3 and F4 keys
from that module’s HOME menu. Menu keys are illuminated when active and when
further menus are available. The four top-level TANDEM-110 menus are:
STATS (Status) – press F1
CNTRL (Control and Routing) – press F2
CNFG (Configure) – press F3
MON (Monitoring) – press F4
The following chart shows the majority of the available TANDEM-110 menus. The actual
menus available may vary slightly as TANDEM-110 software is updated.
The TANDEM-110 menu tree
Note:
Function keys and shaft encoder LEDs are illuminated when active.
Menus or function keys associated with the shaft encoder for changing assigned values
are shown with a black circle.
