Crystal Vision
Installing Statesman
TANDEM-110 User Manual R1.8
22
07/07/2010
Selecting audio groups for embedding
Carrier presence status of all four audio groups in the output SDI stream is displayed next
to four select buttons on the right of the SDI 1 and SDI 2 Status menus.
SDI Status for side 1
SDI Status for side 1
Select the group required in the ‘Audio Group Out’ section to embed into or select ‘None’
to turn embedding off for each side.
Selecting the embedding mode
The embedding format is also selected from within the SDI Status menu. Select from the
following modes:
SONY audio fifo min – (SONY 1) shortest processing delay
SONY audio fifo mid – (SONY 2) medium processing delay
SONY audio fifo max – (SONY 3) large processing delay
SONY – (SONY 4) largest processing delay
SMPTE audio fifo min – (SMPTE 1) shortest processing delay
SMPTE audio fifo mid – (SMPTE 2) medium processing delay
SMPTE audio fifo max – (SMPTE 3) large processing delay
SMPTE – (SMPTE 4) slowest and most robust processing
Embedding modes are discussed in-depth in the Data packet management chapter.
