Crystal Vision
The active control panel
TANDEM-110 User Manual R1.8
37
07/07/2010
3.3 Audio routing and processing options
Pressing F2 from the home menu will bring up the top Control menu. The control menus
provide the following functions:
Current mode status and installed sub-module status
Audio group select for each side’s embedder and/or de-embedder
Each side’s audio delay
Source and destination routing
Selecting audio group and delay values
Select Group and Delay Value
Description
CONTROL
Top line: Mode and options fitted on each side
Bottom line: F1: side 1 group select, F2: side 2 group
select, F3: delay and F4: routing assign sub-menus
Side 1 group select
F2 and shaft encoder selects input group
F4 and shaft encoder selects output group
Side 2 group select
F2 and shaft encoder selects input group
F4 and shaft encoder selects output group
(Enter saves Group selection)
Audio delay value (1-681ms) for each side
F1 and shaft encoder control delay for Side 1
F3 and shaft encoder control delay for Side 1
Audio routing and gain
Press F1 for routing assignment menu
Press F2 for Side 1 audio levels menu and F3 for Side 2
audio levels menu
See ‘Assign Audio Routing’ table for more details
Press F4 for Mono menu
Note:
The presence of an audio group in the serial data stream is indicated by ‘=’ before the
audio group number in menu 1.2.1.