Crystal Vision
Installation
TANDEM-110 User Manual R1.8
85
07/07/2010
DOP2-110
This digital audio output module provides 2 110 Ohm AES stereo pairs or four mono
outputs that may be used as destinations when routing de-embedded signals.
J1
^AES
¬Word Clk
^AES2
¬REF I /P
^110R
¬75R
> OPEN=HI Z
J2
J3
CRYSTAL VISION LTD
110R DOP
JL1
JL4
JL3
JL2
DOP2-110
In addition, jumper links are provided to configure an optional external reference when
using the RM04, RM05 RM06 and RM36 rear modules, in place of a 2
nd
buffered output.
The reference may be selected between AES reference or word clock with JL4. Use JL3
and JL4 together to select between AES2 (2
nd
buffered output – upper two pins) or REF
I/P (external reference – lower 2 pins). Link jumper JL1 is provided to select the external
reference input, which is always fed via a ‘D’ connector, between 110 Ohm (upper 2
pins), HiZ (balanced – centre pin only) or 75 Ohm (unbalanced – lower 2 pins).
DOP2-75
This digital audio output module provides 2 75 Ohm AES stereo pairs or four mono
outputs that may be used as destinations when routing de-embedded signals.
J1
^AES
¬Word Clk
^AES2
¬REF I /P
^110R
¬75R
> OPEN=HI Z
J2
J3
CRYSTAL VISION LTD
75R DOP
JL3
JL4
JL2
JL1
DOP2-75
In addition, jumper links are provided to configure an optional external reference when
using the RM04, RM05 RM06 and RM36 rear modules, in place of a 2
nd
buffered output.
The reference may be selected between AES reference or word clock with JL4. Use JL1
and JL2 together to select between AES2 (2
nd
buffered output – upper 2 pins) or REF I/P
(external reference – lower 2 pins). Link jumper JL3 is provided to select the external
reference input, which is always fed via a ‘D’ connector, between 110 Ohm (upper 2
pins), HiZ (balanced – centre pin only) or 75 Ohm (unbalanced – lower 2 pins).
