Crystal Vision
The card edge display
TANDEM-110 User Manual R1.8
63
07/07/2010
TANDEM allows the user to also handle a wide variety of embedded audio formats when
'ALL' is selected. Some formats exceed the minimal buffer memory requirements by a
wide margin, but will still be safely de-embedded by TANDEM. The selection 'ALL' is
automatically selected by TANDEM internal logic if a SMPTE or extreme format of
embedding is detected. There may be a moment's loss of good audio if one of the SONY
modes is selected and then later the input format changes from Sony to SMPTE or an
extreme format.
The following table summarises the available choices. To enter this menu, ensure that
only MENU dip switch 5 is down.
SEL
no
Display
Description
ADJ funct
2
SD1A_XXXX
The following de-embedding
modes are available:
SONY1, SONY2, SONY3, ALL
ADJ=XXXX
3
SD2B_XXXX
As SEL 2 for side 2
ADJ=XXXX
4
SD1C_XXXX or
SD1E_XXXX
The following embedding modes
are available:
SONY1, SONY2, SONY3,
SONY4, SMPTE1, SMPTE2,
SMPTE3, SMPTE4
ADJ=XXXX
5
SD2D_XXXX or
SD2F_XXXX
As SEL 4 for side 2
ADJ=XXXX
Note:
Please refer to the ‘Data packet management’ chapter for details of HANC processing
and embedding formats.
