Crystal Vision TANDEM-100, Руководство пользователя

Страница: 34 / 104

Crystal Vision
The active control panel
TANDEM-110 User Manual R1.8
33
07/07/2010

Navigating the display
The functions assigned to control panel keys are dependent on the card selected for
control, and the panel mode. The following list illustrates the functions when controlling
the TANDEM110:

DEVICE – enters Device menu to select a card or card to control / enter Panel
setup when held down during power up / shows frame status when pressed from
Statesman mode

CAL – Enter or leave Statesman mode / enter panel diagnostics mode when
held down during power up / updates the display

Asterisk – enters board rename menu from the Device menu

F1 to F4 – soft keys, function assigned within each menu

HOME – moves the display to the home menu

ENTER – accept current selection

Upward arrow – used to move up the menu structure / enter lock panel menu
from the Device menu

Rotary control – shaft encoder used to select options or variable data
Note:
Please refer to the Crystal Vision Control Panel manual for details of the Panel Setup,
Lock Panel and Diagnostic menus.
Updating the display
The values displayed on an active front panel are only updated when an adjustment is
made and when changing menu level. If mode changes occur through the use of
Statesman, card edge controls or through automatic response to the input video signal, the
text displayed on the active front panel will not be updated immediately. If necessary,
press CAL to update the display.