3 of 130
VENDER SAFETY PRECAUTIONS
Please read this manual in its entirety. This service
information is intended for use by a qualified service
technician who is familiar with proper and safe
procedures to be followed when repairing, replacing or
adjusting any Crane Merchandising Systems vender
components. All repairs should be performed by a
qualified service technician who is equipped with the
proper tools and replacement components, using
genuine Crane Merchandising Systems factory parts.
The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction. Children must be supervised not to play
with the appliance.
REPAIRS AND/OR SERVICING
ATTEMPTED BY UNQUALIFIED
PERSONS CAN RESULT IN
HAZARDS DEVELOPING DUE TO
IMPROPER ASSEMBLY OR
ADJUSTMENTS WHILE
PERFORMING SUCH REPAIRS.
PERSONS NOT HAVING A PROPER
BACKGROUND MAY SUBJECT
THEMSELVES TO THE RISK OF
INJURY OR ELECTRICAL SHOCK
WHICH CAN BE SERIOUS OR EVEN
FATAL.
PRODUCT IDENTIFICATION
First production of BevMax 6 5800-6/3800-6 Domestic
and BevMax 6 5800-E6/3800-E6 Export Venders was
March/April 2013. The production date of Crane
Merchandising Systems products is determined by the
date code incorporated in the serial number.
The vender serial number takes the form xxxx-yyyy
zz. The first 4 digits (xxxx) identify the specific
vender. The next 4 digits (yyyy) identify the
manufacturing run that the vender was built in. The
last two alpha characters (zz) identify the quarter and
the year the vender was built. The first alpha
character identifies the quarter as follows:
A= 1
st
Quarter
B= 2
nd
Quarter
C= 3
rd
Quarter
D= 4
th
Quarter
The second alpha character identifies the year:
H = 2009
L = 2013
I = 2010
M = 2014
J = 2011
N = 2015
K = 2012
O = 2016
The Serial Number decals are located on the top left
corner of the back of the vender and on the left front
edge of the product refrigerated area visible through
the glass door.
CE Mark & IIA Declaration:
An updated CE Mark or IIA Declaration document can
be provided upon request: If needed please contact
Technical Support Manager in Williston, SC. Phone:
1- 803-266-5001 or email
.
PHYSICAL CHARACTERISTICS
DN5800-6
DN5800-E6
DN3800-6
DN3800-E6
HEIGHT
73” (1854.2 mm)
73” (1854.2 mm)
WIDTH
47” (1193.8 mm)
40” (1016 mm)
DEPTH
CABINET
32.05”
(814.07 mm)
32.05”
(814.07 mm)
DEPTH
WITH
SERVICE
DOOR
33.5”
(850.9 mm)
33.5”
(850.9 mm)
SHIPPING
WEIGHT
710 lbs.
(322.05kg)
648 lbs.
(293.93kg)
Noise
Level
Operates at < 70db.
Glass Door width = 37.5” (952.5 mm) 5800’s
.
Glass Door width = 28.1” (713.74 mm) 3800’s.
Glass Door height = 68” (1727.2 mm) both.
RECEIVING INSPECTION
DO NOT STORE THE VENDER OUTSIDE.
Upon receipt, inspect the vender for any shipping
damage. Note any damage on the bill of lading and
report any damage to the delivering carrier and follow
their instructions. Although the terms of sale are FOB
shipping point, which requires the consignee to
originate shipping damage claims, Crane
Merchandising Systems will gladly help if you must file
a claim.
UNPACKING THE VENDER
Remove the stretch wrap, fiberboard edge protectors
and corrugated front protector from the outside of
vender.
Do not store the vender with stretch
wrap on. Stretch wrap could bond to
the vender’s surface, which could
damage the finish.
Remove the shipping boards from the bottom of the
vender. The shipping boards are attached by the
leveling legs. To avoid unnecessary damage to the
leveling legs or base, remove the shipping boards by
using a 1-1/2 inch or 38mm socket type wrench to
unscrew the leveling legs. Be sure to replace the legs
Содержание BevMax MEDIA
Страница 1: ...0 of 130 English 80390486 Tier 3 ...
