10 of 130
BELT TENSION ADJUSTMENT
COMPONENTS
The belt tensioning adjustment components have
been revised to ease adjusting belts when needed.
The X Belt Idler Tensioning Assembly in the upper left
hand corner of cabinet now includes a thumb screw.
Adjustments should only be needed if a belt is
replaced.
The Bottom X Drive Tensioner Assembly in the lower
right hand corner of cabinet has a plastic spring
loaded tensioning wheel to keep the belt against the
pulley when moving and does not require any
adjustments.
The Pill (Sign)
The Pill is what we refer to the polycarbonate front on
the service door. The Pill covers the Surround
Lighting and surrounds the Touchscreen, Integrated
Payment System, and Payment Options. You must
know the payment options you wish to use to have the
correct Pill installed for your order. Pills may be
ordered and replaced in the field as required.
Pill Lighting
•
Surround Lighting
The Surround Lighting can be changed in
programming to Red, Blue, White, Green, Purple,
Orange, or Yellow. The Surround and LED Lighting
are controlled by the LED Driver Board. Surround
Lighting is powered by J7 & J8 of the LED Driver
Board.
•
LED Integrated Lighting
The LED Lighting lights up the integrated coin and bill
insert and card swipe openings. The Surround and
LED Lighting are controlled by the LED Driver Board.
LED Lighting is powered by J9, J16, & J18 of the LED
Driver Board.
PROGRAMMING
GENERAL INFORMATION
•
In order to fully utilize the many features of
your vender it is important that you first
understand the options available and
procedures for programming the vending
controller unit (control board). All
programming, testing, and service functions
are accomplished by using the touch screen
in an easy to follow display prompted format.
In stand-alone operation there are twelve
programming modes for servicing, testing,
and setting up your vender. The Operator
programming modes are accessed by
opening the service door and entering the 4
digit PIN number when prompted for it on the
display. From the factory this PIN number is
set to 3333. Once entered the Touch screen
will show programming option icons that need
to be pressed to access menu modes. There
are several other programming modes that
provide different menu options. They include
Driver Menu, Manufacturing Menu, and
Engineering Menu options. Information for
these modes is covered in the Security Codes
Mode programming section of this manual.
To Move through the Menu:
goes back one step in program.
goes back to the home menu screen.
not used at this time
not used at this time
DISPLAY of PRODUCTS and
NUTRITIONAL INFORMATION
Allows the consumer to view the product, cost, and
nutritional information of the selected product before
making a purchase. Crane Merchandising Systems is
providing the nutritional content information based on
information provided by the product manufacturers,
and Crane Merchandising Systems cannot accept
responsibility for content created by others.
•
Press the product selection number. The
display will show a picture of the product
and the price of the product. Sample:
Содержание BevMax MEDIA
Страница 1: ...0 of 130 English 80390486 Tier 3 ...
