Coriant 8600 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 55

Coriant 8600 Скачать руководство пользователя страница 48

6 Technical Speci

fi

cations

6 Technical Speci

fi

cations

6.1

8665 Smart Router Technical Speci

fi

cations

8665 Smart Router subrack
dimensions

445 x 666 x 445 mm (w x h x d), width is without the integrated
side adapter front

fl

ange, the width with the integrated side adapter

front

fl

ange is 483 mm.

17.51 x 26.22 x 17.51 in (w x h x d), width is without the integrated
side adapter front

fl

ange, the width with the integrated side adapter

front

fl

ange is 19.01 in.

Standard 19-inch rack or cabinet mounting.

8665 Smart Router subrack
weight

25 kg/55.11 lbs without cards.
34 kg/74.95 lbs with two DC48 Power Input Modules (PIMs) and
three fan modules

Blank cover plate weight (only
for LU1)

81.86B-LUBLANK-R6 (line unit blank cover with air guide) 0.24
kg/0.52 lbs

Safety compatibility

[EN 60950-1:2006].
[IEC 60950-1:2005].

Electromagnetic compatibility

[EN300 386 V1.6.1]
[FCC 47 CFR Part 15, Subpart B] Class A
Installation environment: telecommunication centre

Storage:
[ETSI EN 300 019-1-1] Class 1.1
Temperature: -5° C to +45° C (+23° F to +113° F).

Transportation:
[ETSI EN 300 019-1-2] Class 2.3
Temperature: -40° C to +70° C (-40° F to +158° F)

2

Climatic/mechanical
compatibility

Operating Conditions:
[ETSI EN 300 019-1-3] Class 3.2

3

Temperature: -5° C to +40° C (+23° F to +104° F).
Relative humidity: 5% to 95%.
Usage altitude 60 m below sea level (106 kPa air pressure) to 3000
m (70 kPa).

The operational temperature range of the whole network element is determined on the
narrowest operating temperature of the interface modules and or SFP/SFP+/XFPs used.

2

Rain is not allowed.

3

Condensation is not allowed.

8600 Smart Routers

76.8670-40128B

8665 Smart Router FP7.0 Reference Manual

© 2015 Coriant.

48

«
...
46
47
48
49
50
...
»

Содержание 8600
























































Отзывы:

Нет отзывов