Coriant 8600 Скачать руководство пользователя страница 2

Страница: 2 / 55

Document Information

Revision History

Document
No.

Date

Description of Changes

76.8670-
40128B

14.12.2015

- Cautionary note regarding cable connections added to ch.

2.3.4 Timing Block

2.5.3 Console Port

, and

2.5.4 External Alarm

Interface

- Restriction regarding maximum current usage added as a footnote to
‘Power input speci

cation’ row in ch.

6.1 8665 Smart Router Technical

Speci

cations

76.8670-
40128A

25.05.2015

Initial release of the document for 8665 Smart Router FP7.0.

This revision of the manual documents the following network element and the corresponding
feature pack or higher.

8665 Smart Router

FP7.0

If a different feature pack of 8600 products, please refer to the relevant product document
program on the Tellabs and Coriant Portal by navigating to

www.portal.tellabs.com

> Product

Documentation > Data Networking > Tellabs 8600 Smart Routers > Technical Documentation.

This manual is protected by U.S. and international copyright laws, conventions and treaties. Your right to use this manual is

subject to limitations and restrictions imposed by applicable licenses and copyright laws. Unauthorized reproduction, modi

cation,

distribution, display or other use of this manual may result in criminal and civil penalties.

The speci

cations and information regarding the products in this manual are subject to change without notice. All statements,

information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind,

express or implied. Users must take full responsibility for their application of any products.

Adobe

Reader

are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

8600 Smart Routers

76.8670-40128B

8665 Smart Router FP7.0 Reference Manual

Содержание 8600
























































Результаты поиска

Содержание 8600

Отзывы:

Coriant 8600, Справочное руководство, Страница: 2 / 55

Результаты поиска

Содержание 8600

Отзывы: