Coriant 8600 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 55

Coriant 8600 Скачать руководство пользователя страница 12

About This Manual

Document Title

Description

8600 Smart Routers
Mobile Optimization Con

fi

guration

Guide (76.8600-50100)

Provides an overview of 8600 system Mobile Optimization
applications as well as instructions on how to con

fi

gure them

with CLI.

8600 Smart Routers
MPLS Applications Con

fi

guration

Guide (76.8600-50123)

Provides an overview of 8600 NEs MPLS applications (including
FRR (one-to-one and facility backup); LDP; protection and
Traf

fi

c Engineering), MPLS-TP applications (including OAM,

linear protection), S-MPLS applications as well as instructions
on how to con

fi

gure them with CLI.

8600 Smart Routers
Performance Counters Reference
Guide (76.8600-50143)

Provides an overview of 8600 system supported performance
counters.

8600 Smart Routers
Reference Manuals

The reference manuals describe the 8600 network element
features including:

• NE enclosure, baseboard, power supply modules, and

interfaces in 8602 Smart Router FP7.0 Reference Manual
(76.8670-40130)

• NE enclosure, baseboard, power supply modules, interfaces

and physical LM types in 8609 Smart Router FP7.0 Refer-
ence Manual

• NE enclosure, baseboard, power supply modules, SCMs, HM

and LM types in 8611 Smart Router FP7.0 Reference Manual

• NE enclosure, baseboard, power supply modules, and in-

terfaces in 8615 Smart Router FP7.0 Reference Manual
(76.8670-40132)

• NE subrack, fan modules, CDCs, line cards and IFMs in 8630

Smart Router FP7.0 Reference Manual

• NE subrack, fan modules, CDCs, line cards and IFMs in 8660

Smart Router FP7.0 Reference Manual

• NE subrack, fan modules, line unit and switch unit in 8665

Smart Router FP7.0 Reference Manual (76.8670-40128)

8600 Smart Routers
Routing Protocols Con

fi

guration

Guide (76.8600-50121)

Provides an overview of 8600 NEs routing protocols, including
BFD; BGP; BGP MP; ECMP; IS-IS; OSPF and VRRP as well as
instructions on how to con

fi

gure them with CLI.

8600 Smart Routers
Scalability Reference Manual
(76.8600-50160)

Provide a summary of tested scalability limits of the 8600 Smart
Routers.

8600 Smart Routers
SNMP MIB Support
(76.8600-50116)

Describes SNMP MIB support by the 8600 NEs and provides
information on the supported objects and traps. For further
information on SNMP MIBs, see the related RFCs.

8600 Smart Routers
Statistic Counters Reference Guide
(76.8600-50142)

Provides an overview of 8600 system supported statistic counters.

8600 Smart Routers
Synchronization Con

fi

guration

Guide (76.8600-50114)

Provides an overview of 8600 NEs synchronization functionality,
including physical layer Frequency Synchronization (SEC, EEC);
PTP Frequency Synchronization; Phase-Time Synchronization
(L2 and L3 applications) as well as instructions on how to
con

fi

gure them with CLI.

8600 Smart Routers

76.8670-40128B

8665 Smart Router FP7.0 Reference Manual

© 2015 Coriant.

12

«
...
10
11
12
13
14
...
»

Содержание 8600
























































Отзывы:

Нет отзывов