Concept Smoke Screen TITANIUM Ti100, Инструкция по установке и эксплуатации

Страница: 24 / 40

Top up life
cycle 30 minutes 1 to 120 minutes in 1
minute intervals Limits top up operations by time.
When a Screen Sensor is used on Z3,
this setting will cause the SSM to
ignore further inputs from the Screen
sensor after the timer has expired. The
timer begins after the first cycle of fog
production i.e. if the “Smoke on” time
is set to 2 minutes, the top up life
cycle commences after 2 minutes.
Top up % time 25% 0 to 100% in 1%
intervals Sets top up operation as a % of
“Smoke on time”. If the Screen sensor
detects a drop-in fog density, the SSM
will operate according to how this is
set.
Smoke on
time 01min 00 sec 0 to 15 minutes in 1
second intervals Sets duration of first burst. Timer only
runs when fog is being actively
produced. Rest phases are ignored.
Pump 2
smoke time 01min 00 sec 0 to 1 minute in 1
second intervals Ti150D function only. Sets duration of
second pump run time on an
activation demand.
Panic smoke
time 01min 00 sec 0 to 15 minutes in 1
second intervals Sets duration of Panic smoke time.
Timer only runs when fog is being
actively produced. Rest phases are
ignored.
Smoke Pulse Pulse on time 00min 00 sec 0 to 15 minutes in 1
second intervals THESE SETTINGS SHOULD NOT BE
CHANGED
Pulse high
time 1 1 to 60 in intervals of 1.
Pulse low time 1 1 to 60 in intervals of 1.
Low incr. time 0 0 to 60 in intervals of 1.
Hold off On On
Off Enables hold-off retriggering. When
“Smoke on” timer expires, and an
intruder condition still exists, if the
hold-off reactivates, the SSM will
re-trigger according to the sub-menu
settings.
Hold off time 25% 0 to 100% in 1%
intervals Item available if Hold off set to “On”.
Sets the re-triggering activation time
as a % of the set “Smoke on” time.
Hold off rep nr 10 0 to 50 in single
intervals Item available if Hold off set to “On”.
Sets the number of times the SSM will
retrigger when hold-off reactivates.
24