Concept Smoke Screen TITANIUM Ti100, Инструкция по установке и эксплуатации

Страница: 28 / 40

Subnet Mask 255.255.255.0
00 Adjustable by digit Item available if DHCP = “Off”. System
must be restarted using the menu
command to register a change.
Gateway 192.168.002.0
01 Adjustable by digit Item available if DHCP = “Off”. System
must be restarted using the menu
command to register a change.
TFTP Update
IP 080.112.203.00
6 Adjustable by digit System must be restarted using the
menu command to register a change.
SNMP IP 000.000.000.
000 Adjustable by digit System must be restarted using the
menu command to register a change.
SNMP
Username Default Default
ConceptSSM Allows a limited function set to
become available to a remote user (i.e.
security manager or remote fault
monitoring centre). Select
“ConceptSSM” to enable.
Update
Firmware No
Yes Contacts the TFTP Update Server, and
downloads and deploys a new
firmware set if one is available.
Restart
System No
Yes Restarts the system. This is needed to
change to the networking settings to
take effect.
Fluid
Replenish No
Yes Used if the use of an external reservoir
has been set by Concept Smoke
Screen (facility not available to the
installer). Select Esc for No and Enter
for Yes.
Reset Settings Factory Default Defaults the system to factory settings
(NB: These may be different to
delivery settings).
Tamper
Enable Tamper Front Enabled Enabled
Disabled Tamper function enable or disable.
Tamper Fluid
Tamper
Battery
Tamper Back
Tamper
External
Disable Fan Fan enabled. Fan enabled.
Fan disabled. Switch the fan function on or off.
28