Concept Smoke Screen TITANIUM Ti100, Инструкция по установке и эксплуатации

Страница: 5 / 40

1.3 INTRODUCTION
This manual covers the Titanium line of products.
Before commencing installation of the Smoke Screen ensure that you have all of the following equipment supplied in
the box:
● 1 x Smoke Screen.
●
1 x Mounting bracket.
● 1 x Swift-Fit fluid reservoir.
● 2 x 12v batteries.
● 1 x literature pack and warning sign.
●
1 x Extra 30-degree Nozzle for wall mounted installation.
You will also need:
● Mains power supply ​
; ​
an unswitched 13 amp fused spur connected to dedicated breaker.
● Connections into the alarm panel or other triggering system.
● PIR (or equivalent) to provide the hold-off where required.
● Optionally a Screen Sensor for top-up functionality.
1.4 OVERVIEW
The Smoke Screen is designed to form part of an existing intruder alarm system but may also be configured as a
‘stand-alone’ system or as part of a centrally monitored, command and control system. A typical installation is shown
in the following schematic:
5