Concept Smoke Screen TITANIUM Ti100, Инструкция по установке и эксплуатации

Страница: 17 / 40

5.3 FLUID MANAGEMENT
The Smoke Screen has a replaceable 1 litre Swift-Fit fluid reservoir (also known as product code SFL-1000)
that is accessed by removing the cover on the right-hand side of the unit. The fluid level is monitored
using sensors in the fluid reservoir to give a “Low Fluid” indication output when the Swift-Fit is
approximately 50% full and an “Empty Fluid” output when the bottle is empty. The Smoke Screen will not
produce fog when there is an “Empty Fluid” indication.
Fluid Replenish
Obtain a replacement fluid reservoir from your Smoke Screen supplier. Open the right-hand access panel.
Lift the reservoir out of the compartment by removing the lower end first (see photo below). Disconnect
the fluid monitoring cable and the fluid feed pipe (pull collar to release). Refitting the reservoir is the
reverse of the removal process.
17